Thread: BiNPDA Security Manager v1.0 S60v3 SymbianOS9 Internal-BiNPDA

BiNPDA Security Manager v1.0 S60v3 SymbianOS9 Internal-BiNPDA

BiNPDA's ROOTSiGN - Sign any Unsigned Release and Install

In order to install "Unsigned" releases, you need to go through a one-time procedure. You will need to run the in the release included "SecMan.exe". This program allows you to install our future "Unsigned" releases, without signing them every time.

For this, you will need to have TRK (included in this package) installed, and connected to your pc via USB connection.

s60_3_0_app_trk_2_8_6.sisx for SymbianOS9 devices WITHOUT FP1

s60_3_1_app_trk_2_8_6.sisx for SymbianOS9 devices WITH FP1

To get this app properly running, make sure you have installed the newest Nokia PC Suite, and your phone connected via "PC Suite" mode. On the phone, run the TRK app, in applications folder. When it asks for bluetooth connection, don't turn it on, and change connection settings to USB. After you have done that, click "Next" and follow the instructions on screen.

When the installation is done, look in the Applications folder on your phone, and find SecMan. Open it, and click on "Install Root Certificate".
After this is done, you will be able to install our future "Unsigned" releases like normal "Signed" applications.

Please keep in mind, if you format / upgrade your phones firmware, you'll need to do this step again and after that manually install those apps from Application Manager.

NOTE: To install previous unsigned releases, use RootSiGN v1.0 (Included in the package) first to sign these releases with our root certificate. This can be used to sign and install any unsigned .sis(x) file

Installing unsigned files using BiNPDA RootSign and SecMan - A Complete Guide.

So, Lets start. Whereever I have included screenshots, I have written (Pic Included). So, if you cant see, reload the page.
Note: This process is extremely simple. Make sure you follow it exactly as I tell you. Theres no scope to go wrong here.

What you need:

1.WinRAR installed on your PC
2.A Series 60 3rd Edition Phone
3.USB Cable [Bluetooth wont do]

Step 1.1: Download the file: BiNPDA Security Manager v1.0 S60v3 SymbianOS9 Internal- BiNPDA from the post above. You should have such a file. (Pic Included)

Next, Right click the file and select "Extract Here".

Step 1.Connect your mobile to the PC via USB Cable, and, mode as "PC Suite". From the folder, select the particular TRK SIS File applicable for your phone and install it. Here's a list.

Pre FP1 Devices should install the file: s60_3_0_app_trk_2_8_6.sis
These include:Nokia N77,Nokia E61i,Nokia E65,Nokia N93i,Nokia N91 8GB,Nokia E62,Nokia E50,Nokia 5500,Nokia N93,Nokia N73,Nokia N80Nokia N71,Nokia N92,Nokia E70,Nokia E60,Nokia E61,Nokia 3250,Nokia N91

Post FP1 Devices should install the file:s60_3_1_app_trk_2_8_6.sis
These include:Nokia N82,Nokia E51,Nokia N95 8GB,Nokia N81,Nokia N81 8GB,Nokia 6121 classic,Nokia 6120 classic,Nokia 5700 XpressMusic,Nokia 6110 Navigator,Nokia E90 Communicator,Nokia N76,Nokia 6290,Nokia N95

Install the applicable file on your Memory Card.

Step 2.1:Open Metro TRK. You will be greeted by the screen

Click No. Then, go to Options > Settings.

Put up the following settings under Settings.

Then, go to the TRK Main Screen again, Options > Connect.

You should have a screen like this. [The contents could be different. But, it should say Connected besides Status]

Keep Metro TRK Running. Exit via the Menu Key.
Step 2.1:Now, go back to the folder where all the files are extracted. Run Secman.exe.

Click Next. On the Next Screen, just check the option "Find MetroTRK Port Automatically" and click Next.

After some time, it will start installing the SecMan application to your phone.
After install, you should have Secman on your mobile phone.
Step 3: If the above process was successful, then you should have a Secman icon on your phone

Open SecMan,go to Options and select "Turn Plat Security OFF".

Then, go top Options again and select "Install ROOT Certificate".

Thats it. Now you can install any Unsigned-BiNPDA Release. But, we want to install releases by other crackers/devlelopers too, right? Then, lets move on to Step 4.

Step 4: Put any Unsigned File in the same folder which we have created in Step 1.

Oprn ROOTSiGN.EXE from the same folder, select the SIS File and click "Root Sign the file".

After its done, you will have 2 files in the folder. One Unsigned and One RootSigned.

Install the Rootsigned file. You will see it installs just like a signed SIS file.

Important: After you have installed the files, go to SecMan and go to Options > Turn Plat. Securities ON.
Its not a good idea to keep platform securities off 24x7. They are there for a reason.

To install any unsigned release from now on, you just need to repeat Steps 3 and 4.

Thanks Buddy